Yes, cleaning or sometimes replacing it is a part of every 2/2N overhaul.
John Hermanson
Camtech Photo Services, Inc.
21 South Lane, Huntington, NY, 11743-4714,
631-424-2121, www.zuiko.com
Olympus OM Service since 1977
<:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:>
----- Original Message -----
From: "Fernando Gonzalez Gentile" <fgnzalez@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxx>
Cc: "John Hermanson" <omtech@xxxxxxxxx>
Sent: Thursday, April 14, 2005 9:23 AM
Subject: [OM] Re: Digital, digital, digital. Bah, humbug!
> Thanks once again, John.
> I'll take a look at the manual now, so as to identify the part in
> question.
> In case of doubt, I'm afraid I would be in the need of bothering with
> another question.
> Is that ceramic resistor replaceable at Camtech?
>
> Fernando.
>
>
> on 14/04/2005 09:08, John Hermanson at omtech@xxxxxxxxx, wrote:
>
>> Erratic auto exposure (especially after water damage) could be caused by
>> a
>> dirty / corroded ceramic resistor board which encircles the top of the
>> meter, just under the top cover.
>>
>> John Hermanson
>
>
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|