The typical specs for 1/3A and 1/3AA are nominally the same **in height** :
16.5mm +/-0.5mm. Tabs
add some height. It will be intereting to hear how these NiMh cells perform, as
the peak short
duration current draw is quite high in this application ~ 1.6A for a pretty
small cell. This
translates to ~"6C" , a pretty high rating.
Tim Hughes
--- John Hermanson <omtech1@xxxxxxxxxxx> wrote:
>
> These look good. They are approx. 1mm longer than nicad 1/3A cell, which
> makes the completed cluster about 1/4" longer than the nicad version.
> Perhaps the cluster can be made with the cells on end. I have ordered
> some and will try.
>
> ___________________________________
> John Hermanson
> Camtech Photo Services, Inc.
> 21 South Lane, Huntington NY 11743
> 631-424-2121 | Olympus OM Service since 1977
> http://www.zuiko.com | omtech1 AT verizon.net
>
>
> Darin wrote:
> > John,
> >
> > Is the cluster Ni-Cd or NimH?
> >
> > What do you think about Tims suggestion of this NimH cluster?
> > <http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=176>
> >
> > Thanks for your insight,
> > Darin
> >
> > ----- Original Message -----
> > From: John Hermanson
> >
> >>$149 for the overhaul, includes cluster. Actual price based on
> >>inspection, tampered, impacted, sand , water damaged packs possibly
> >>higher.
> >>
> >>$89.95 for a cluster alone, you do the work, no warranty.
> >>
> >>
> >>Someone on the list may be able to give you step by step on how to do
> >>it. Also, if the battery check frame is pushed in (and therefore "check"
> >>switch always "on"), that will have to be fixed or pack won't work.
> >>
> >
> >
>
>
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|